Applications
This x-ray collimator is applicable for common X-ray diagnostic equipment with tube voltage of 150kVTechnical parameters
| Max Voltage | 150KV |
| Maximum X-ray field coverage range | 480mm×480mm (SID=100cm) |
| The average brightness of the light field | >160 lux |
| Edge contrast ratio | >4:1 |
| Power supply requirement of projection lamp | 24V AC/150W |
| Bright X-ray field duration for Once | 30S |
| Distance from Focal Spot of X-ray tube to the mount plane of collimator SID (mm)(optional) | 60 |
| Filtration(Inherent) 75kV | 1mmAl |
| Filtration(Additional) | Manually choose three filtration |
| Control method | Manual |
| Drive motor | -- |
| Motor Control | -- |
| Position detection | -- |
| Input power | AC24V |
| (SID)Measuring tape | Standard Configuration |
| Center laser instructions | optional |
| Dimension(mm)(W×L×H) | 260×210×190 |
| Weight(Kg) | 7.9 |
Notice
When replacing, do not directly touch the glass case of the lamp with your hands to prevent the glass
case from being stained with fingerprints and oily dirt. After replacement, please wipe the glass case of
the lamp with alcohol to remove the stains.
After the beam limiter is used, the surface of the housing should be wiped with an inorganic solvent
every three months to keep it clean.
Please dispose of the waste of this product in accordance with the relevant environmental protection laws
and regulations of the local government to protect the local environment.
