Dental X-ray Tube Xd2

Looking for a reliable and efficient dental X-ray tube? Look no further than Xd2 - our dental X-ray tube, proudly manufactured in our factory. Trust us for cutting-edge technology and unparalleled quality.

Request a Quote
  • Dental X-ray Tube Xd2
  • Dental X-ray Tube Xd2
  • Dental X-ray Tube Xd2
  • Dental X-ray Tube Xd2
  • Dental X-ray Tube Xd2
  • Dental X-ray Tube Xd2
  • Dental X-ray Tube Xd2
  • Dental X-ray Tube Xd2
  • Dental X-ray Tube Xd2

PRODUCTS DETAILS

Description

This tube, RT12-1.5-85  is designed for intra-oral dental x-ray unit and available for a nominal tube voltage with self-rectified circuit. The high anode heat storage capacity ensures a wide range of applications for intra-oral dental application. A special designed anode enables an elevated heat dissipation rate which leads to a higher patient throughput and a longer product life. A constant high dose yield during the entire tube life is ensured by the high density tungsten target. Ease of integration into system products is facilitated by extensive technical support.

Technical data

Nominal Tube Voltage 85kV
Nominal Focal Spot 1.5(IEC60336/2005)
Filament Characteristics Ifmax=2.6A, Uf=3.0±0.5V
Nominal Input Power(at 1.0s) 1.8kW
Maximum Continuous Rating 225W
Anode Heat Storage Capacity 10kJ
Target Angle 23°
Target Material Tungsten
Inherent Filtration Min 0.6mmAl equivalent at 75kV
Weight approx.120g

Competitive Advantage

Elevated anode heat storage capacity and cooling Constant high dose yield Excellent life time Certification:  SFDA

Applications

This tube, RT12-1.5-85  is designed for intra-oral dental x-ray unit and available for a nominal tube voltage with self-rectified circuit.

Detailed Images

RT12-1.4-85

Cautions

Read the cautions before using the tube

X-ray tube will emit X –ray when it is energized with high voltage, Special knowledge should be required and cautions need to be taken when handling it。 1. Only a qualified specialist with X-Ray tube knowledge should assemble, maintain and remove the tube。 2. Sufficient care should be taken to avoid strong impact and vibration to the tube because it is made of fragile glass。 3. Radiation protection of the tube unit must be sufficiently taken。 4. The minimum sorce-skin distance (SSD) and the minimum filtration should match the regulation and meet the standard。 5. The system should have proper overload protection circuit, the tube may be damaged due to only one overload operation。 6. When any abnormalities are found during operation, immediately switch off the power supply and contact the service engineer。 7. if the tube is with a lead shield, to dispose of lead shield must meet government regulations。

Characteristics

Hot Products

 X-ray Push button Switch Omron Microswitch Type  HS-04

X-ray Push button Switch Omron Microswitch Type HS-04

X-ray Shielding Lead Glass 37 ZF3

X-ray Shielding Lead Glass 37 ZF3

Medical X-ray Collimator Automatic X-ray Collimator 34 SRF202AF

Medical X-ray Collimator Automatic X-ray Collimator 34 SRF202AF

Medical X-ray Tube XD3A

Medical X-ray Tube XD3A

HV Cable Receptacle 75KV HV Receptacle CA1

HV Cable Receptacle 75KV HV Receptacle CA1

 Medical X-ray Collimator Automatic X-ray Collimator SR301

Medical X-ray Collimator Automatic X-ray Collimator SR301

X-ray Push button Switch Mechanical Type  HS-01

X-ray Push button Switch Mechanical Type HS-01

Panoramic Dental X-ray Tube TOSHIBA D-051

Panoramic Dental X-ray Tube TOSHIBA D-051

X-ray Push button Switch Omron Microswitch Type  HS-02-1

X-ray Push button Switch Omron Microswitch Type HS-02-1

X-ray Push button Switch Omron Microswitch Type 14 HS-01

X-ray Push button Switch Omron Microswitch Type 14 HS-01

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours